| MOQ: | One Unit |
| Price: | Negotiabale |
| Standard Packaging: | N/A |
| Delivery Period: | 25--35Day After Downpayment |
| Payment Method: | L/C, T/T, D/A, D/P |
| Supply Capacity: | Ten Units/ Month |
Used Sany SY412C-8S
This type concrete mixer truck is 12 cubic with 8X4 chassis, avoid the over weight . it can increase the service life , good condition with attractive price, don't hesitate, just contact with us .
| Model SY412C-8S | ||
| Overall Parameters | Rudder Hand | Left |
| Curb Weight(kg) | 15000 | |
| Full Load Weight (kg) | 43800Kg | |
| Dimension (L×H×W)(mm) | 9830×2500×4000 | |
| Wheel Base(mm) | 1700+3175+1350 | |
| Min. Ground Clearance(mm) | ≥240 | |
| Min. Turning Diameter(m) | ≤22 | |
| Fuel Consumption(L/100km) | ≤42 | |
| Chassis | Engine Model | Hino P11C-UJ |
| Displacement(L) | 10.52 | |
| Rated Power/Rev Speed(kW/rpm) | 259/2100 | |
| Max. Torque/Rev Speed(N.m/rpm) | 1460/1100 | |
| Emissions Standard | Euro V | |
| Gear-box | Fast 9JS150TA-B | |
| Front Axle(t) | 2×6.5 | |
| Intermediate, Rear Axle(t) | 2×13 | |
| Tyre | 11.00R20 | |
| Drum | Capacity(m3) | 12 |
| Feeding Speed(m3/min) | ≥8 | |
| Discharge Speed(m3/min) | ≥5 | |
| Discharge Residual Rate | ≤0.5% | |
| Slump(mm) | 50~210 | |
| Water Tank Capacity(L) | 600 | |
| Reducer | PMP PMB7.1 | |
| Hydraulic Pump | Rexroth A10VGT090 | |
| Motor | Rexroth A2FMT090 | |
| MOQ: | One Unit |
| Price: | Negotiabale |
| Standard Packaging: | N/A |
| Delivery Period: | 25--35Day After Downpayment |
| Payment Method: | L/C, T/T, D/A, D/P |
| Supply Capacity: | Ten Units/ Month |
Used Sany SY412C-8S
This type concrete mixer truck is 12 cubic with 8X4 chassis, avoid the over weight . it can increase the service life , good condition with attractive price, don't hesitate, just contact with us .
| Model SY412C-8S | ||
| Overall Parameters | Rudder Hand | Left |
| Curb Weight(kg) | 15000 | |
| Full Load Weight (kg) | 43800Kg | |
| Dimension (L×H×W)(mm) | 9830×2500×4000 | |
| Wheel Base(mm) | 1700+3175+1350 | |
| Min. Ground Clearance(mm) | ≥240 | |
| Min. Turning Diameter(m) | ≤22 | |
| Fuel Consumption(L/100km) | ≤42 | |
| Chassis | Engine Model | Hino P11C-UJ |
| Displacement(L) | 10.52 | |
| Rated Power/Rev Speed(kW/rpm) | 259/2100 | |
| Max. Torque/Rev Speed(N.m/rpm) | 1460/1100 | |
| Emissions Standard | Euro V | |
| Gear-box | Fast 9JS150TA-B | |
| Front Axle(t) | 2×6.5 | |
| Intermediate, Rear Axle(t) | 2×13 | |
| Tyre | 11.00R20 | |
| Drum | Capacity(m3) | 12 |
| Feeding Speed(m3/min) | ≥8 | |
| Discharge Speed(m3/min) | ≥5 | |
| Discharge Residual Rate | ≤0.5% | |
| Slump(mm) | 50~210 | |
| Water Tank Capacity(L) | 600 | |
| Reducer | PMP PMB7.1 | |
| Hydraulic Pump | Rexroth A10VGT090 | |
| Motor | Rexroth A2FMT090 | |